Anahathacottage.com

How do you make sure that you are getting the most out of the cartridge that you buy? Many people buy a cartridge and don’t think twice before ripping open the package, inserting the cartridge and clicking ‘print’. But toner cartridge articles insist that there are important steps to take beforehand to ensure that you are getting the best life span and print quality out of your cartridge.

For example, toner cartridge articles suggest that you clean out the printer before you install a fresh cartridge. Dust and other particles can keep your printer from performing at top speeds, and they can also damage the quality of the colors. Use a damp cloth to wipe off the inside of the printer and the cartridge carrier. Then go back over the area with a dry cloth. Then wait five or ten minutes until everything is definitely dry.

You can also increase the quality of your prints by cleaning off the carriage contacts on the inkjet cartridges. Use a cotton swab because the contacts are very gentle and too much force can break them, which means that your cartridge is no longer any good. Then you need to ensure that the contacts are fully dry before placing the cartridge back into the printer. Go over the contacts with a dry towel or paper towel to ensure that they are completely dry.

Finally, you are ready to load your cartridge into your printer. Take extra time to run tester prints, which means that you should print off sheets in black and make sure that everything works well. Then print off sheets in different colors to test the quality and vividness of the color. If the quality is not to your liking, you may decide to take out the cartridge and clean the printer and the contacts one more time.